MANUAL BENDING MACHINES


SCHECHTL

SCHECHTL

LBX & UK


Model UK is a manual operated bending machine with a capacity of max. 1,5 mm sheet thickness (related to 1000 mm working length) or 1,0 mm sheet thickness (related to 2000 mm working length) for Model UKV. The difference between the UK series and the UKV series iare stronger upper, bending and lower beam elements. So model UKV covers a larger range of applications from up to 2000 mm working length and up to 2,0 mm thicknesses.

The remarkable things about the two models are the segmented toolings at all three bar elements, upper beam, lower beam and bending beam. Therefore it is possible to bend parts at all 4 sides and produce even complex box shapes with flanshes up and down .

The segments go from 30 mm to 100 mm or even 200 mm at model UKV. With the snap-on system all segments at upper, lower and bending beam are fixed to a support rail by our patented quick clamping system. Thus the segments can be changed and combined quickly without using any additional screws and tools. Single segments can be removed from the support rail to get space for preformed flanges. Working a part on all four sides without using any additional inserts nor damaging already formed flanges - that is model UK and UKV. The segmented tooling system give you all opportunities.

All UK/UKV models have a standard foot pedal for closing the upper beam. Therefore <ou are much faster in possitioning your part and accuracy is significantly higher.

A detachable toolbox behind the machine serves both as storage for segments and as a sheet support. It come standard just like an angle gauge for repetitive bendings and a set of wheels.

Additional options are a roller shear, special segments to bend window sillsand different back gauge systems.

- welded steel design
- all bearings and guideways are maintenance free
- adjustable bending bar
- opening of clamping bar approx. 100 mm
- scale for bending angle and adjustable angle gauge for equal bending angles
- tool box
- wheels (only for model UK)


 

 











 

SCHECHTL

SCHECHTL

HBM

Model HBM is a manual bending machine with a capacity of max. 1,0 mm (related to 3100 mm working length).

The part is led through upper and lower bar and lower bar is closed vertically either with a foot pedal or with two handles on each side of the machine. So the piece doesn't slide forwards being clamped and the accuracy is preserved. The upper beam clamping pressure can be adjusted on each side of the machine separately. The upper beam can be opened to appr. 125 mm with a handle on each side of the machine. All bearings and guideways are maintenance-free.

Model HBM comes standard with a profile rail 20°, r=1 mm for the upper beam and one of each insert rails 68/10 mm and 68/14 mm for the bending beam. All bending rails can be change. Therefore the bending bar can be lowered by a hand wheel and adjusted to different sheet thicknesses and radius. There is also a scale for bending angles and an adjustable bending bar stop to do equal bending angles.


 

 

SCHECHTL

SCHECHTL

HA

Model HA is a manual bending machine with a capacity of max. 1,5 mm (related to 3100 mm working length). The combination of solid machine-elements in a welded construction and a ingenious system of springs for weight compensation at upper and bending beam makes the HA a "power package".

The part is led through upper and lower bar and lower bar is closed vertically either with a foot pedal or with two handles on each side of the machine. So the piece doesn't slide forwards being clamped and the accuracy is preserved. The upper beam clamping pressure can be adjusted on each side of the machine separately. The upper beam can be opened to appr. 100 mm with a handle on each side of the machine. All bearings and guideways are maintenance-free.

Model HA comes standard with a sharp edged rail 20° and a round rail r= 3 mm (HA 400 only with one profile rail 20°, r=1,2 mm) for the upper beam and one of each insert rails 68/10 mm and 68/24 mm for the bending beam. All bending rails can be change. Therefore the bending bar can be lowered and adjusted to different sheet thicknesses and radius. There is also a scale for bending angles and an adjustable bending bar stop to do equal bending angles.

Our models HA 310 and HA 400 are inexpensive alternatives to the motor-operated folding machines in their capacity range.
 


 

 

SCHECHTEL

SCHECHTEL

KS

Model KS is a manual folding machine with a capacity of max. 1,0 mm sheet thickness, model KSV of max. 1,5 mm (related to 2000 mm working length). The many possibilities of adjustment and the extensive optional accessories make it to the world's most successful eccentric-driven folding machine with over 20000 sold machines. This "classic" folding machine has been awarded at several fairs all over the world and shouldn't be missing in any workshop.

Upper and lower bar consist of reliable rolled steel bars, the bending bar is a welded steel construction. All bearings and guideways are maintnance-free. The part is laid between upper and lower bar and the upper beam closes vertically either with a foot pedal or with two levers on each side of the machine, which at the same time serve as weight compensations. So the piece doesn't slide forwards being clamped and the accuracy is preserved. The clamping pressure can be adjusted on each side separately. The max. opening of the upper bar is app. 80 mm.

Models KS and KSV come standard with a sharp rail 20° and a round rail r= 2 mm for the clamping beam and one of each insert rail 68/10 mm and 68/24 mm for the bending beam. All bending rails can be changed. Therefore the bending bar can be lowered and adjusted to different sheet thicknesses and radius. There is also a scale for bending angles from 0-160° and an adjustable bending bar stop to do equal bending angles.

The bending bar has anti-friction bearings and an adjustable weigth compensation by means of crank and stroke.

With a numberous range of accessories (optional) KS and KSV are "power packages" for folding sheet metal.
 


 

 

SCHECHTEL

SCHECHTEL

BA

Model BA is a manual-operated bending machine with a capacity of max. 1,0 mm steel (related to 2040 mm working length). In combination with an optional roller shear it is both a universal job-site and a efficient workshop machine.

Model BA is a welded steel construction to provide the necessary solidity and stability for transports to the job-site. In addition all bearings and guidewaiys are maintenance-free. The metal sheets are lead through upper and lower bar and clamped by operating a lever on the right side of the machine. The upper bar clamping pressure can be adjusted on both sides by means of set-screws. The max. opening of clamping bar is 100 mm.

Model BA comes standard with a sharp rail 20° for the clamping beam and one of each insert rails 68/10 mm and 68/24 mm for the bending beam. All bending rails can be changed. That requires an adjustable bending beam for different material thicknesses and radii. At the bending beam you find a scale for bending angles from 0-160°. There is also an adjustable stop for the bending bar to do equal bending angles.

Upper and bending bar have an adjustable weight compensation that allows to work with least manual effort.

 

SCHECHTEL

SCHECHTEL

TBA

Model TBA is a manual folding machine with a capacity of max. 0,63 mm sheet thickness (related to 1000 mm working length). It is especially small and handy. With a total weight of 44 kg it can even be carried by one person and it is a useful tool at the job site. It is the perfect bending and cutting (see roller shear) tool for small sheet metal applications. Model TBA can be mounted on every work-bench or van. There is also an optional a floor-stand available.

Model TBA is a welded steel design. The part is laid between upper and lower bar and the upper beam closes vertically by a lever on the right side of the machine. The clamping pressure of the upper beam can be adjusted on each side of the machine by a locking screw. The max. opening of the clamping beam is 40.
 

 

 

SCHROEDER

SCHROEDER

BAM

Here the new Schröder „Multifunction“ with Rotating Upper Beam. Within a few seconds you get the clearance you need for short U-profiles.
 


 

 

SCHROEDER

SCHROEDER

Modular 2000

The Smallest is the Biggest. Modular extendable folding Machine for building site and long sheets.
 


 

 

SCHECHTEL

SCHECHTEL

AK

The classical Folder for your workshop available from 1000mm to 3000mm: Diffrent Accesoires make it very flexible.
 


 

 

SCHECHTEL

SCHECHTEL

ASK

The most universal manual folder. The segmented tooling for all Axes provide to bend even "impossible" profiles. The ASK-Line is available with 1000 or 1500mm.

NEW: Fast Clamping System for Upper, Lower and Bending Beam.
 


 

 

 

 

Home | Sitemap | Contact us | Credits

Phone +39 030 2061781 | VAT 01125220218 |  Visits 931.394

www.alpewa.it - info@alpewa.it